 |
|
|
|
|
CTI Systems S.A. to join the Paul Wurth GroupCet article existe aussi en français Luxembourg, 5 June 2009. Société Nationale de Crédit et d’Investissement (‘SNCI’) - Luxembourg state-owned Investment and Development Bank and Paul Wurth S.A. (‘Paul Wurth’) are pleased to announce that they have signed today contracts allowing Paul Wurth to purchase in a first step 50.4% of the shares held by SNCI in CTI Systems S.A. (‘CTI’). Today’s agreements materialize the intentions of the parties announced on 31 March 2009. <more> 2008: An excellent year not yet impacted by the crisis Cet article existe aussi en français | Lesen Sie diesen Beitrag auf Deutsch Luxembourg, May 12, 2009. The ordinary General Meeting of shareholders of Paul Wurth S.A. was held today, May 12, 2009 and approved the financial statements for the year 2008. DRAGON STEEL taps first hot metal from PRIMUS® Recycling PlantLuxembourg, 8 April 2009. At Dragon Steel Corporation’s (DSC) Taichung works in Taiwan, DSC and its supplier Paul Wurth are currently performing the hot commissioning of the new PRIMUS® plant which will recycle fine material (dusts, sludge, etc.) from the existing Electric Arc Furnace shops and from future sintering, blast furnace ironmaking and BOF steelmaking. <more> Paul Wurth and CTI Systems joining forcesCet article existe aussi en français Luxembourg, 31 March 2009. Société Nationale de Crédit et d’Investissement (‘SNCI’) - Luxembourg state-owned Investment and Development Bank and Paul Wurth S.A. (‘Paul Wurth’) announce that they have signed a memorandum of understanding in relation to the sale of 50.4% of the shares held by SNCI in CTI Systems S.A. (‘CTI’) to Paul Wurth S.A. <more> Peiner Träger GmbH orders de-dusting plant for EAF shop extension with Paul WurthLesen Sie diesen Beitrag auf Deutsch Essen and Luxembourg, 17 February 2009. In the frame of the largest ever investment programme of the company’s history, Peiner Träger GmbH (PTG) increases the capacity of the existing EAF steelmaking plant in Peine, Lower Saxony, Germany. <more> Salzgitter goes for New Technology in Sinter Plant Off-Gas CleaningEssen and Luxembourg, 15 January 2009. Salzgitter Flachstahl GmbH decided to invest in a flue gas treatment plant which will enable the sinter plant of the Salzgitter (Lower Saxony, Germany) works meeting the stringent conditions of the German “TA Luft” environmental legislation. <more> Paul Wurth Services - a new business unit in BrazilBelo Horizonte, 12 December 2008.Paul Wurth do Brasil has been established for more than three decades in the Brazilian iron making market. The experiences acquired during this time and the solid relationship built with the local steel industry, together with the increasing demand for customer support services in the market have motivated the setting-up of the new business unit Paul Wurth Services. <more> Tata Steel to go ahead with capacity expansion at JamshedpurGenova, 3 December 2008. Just less than 6 months after commissioning the new blast furnace “H” at their Jamshedpur plant, TATA STEEL broke ground for the construction of the next modern ironmaking unit. <more> Nucor Chooses Paul Wurth Bell Less Top® Charging TechnologyCanonsburg, PA and Luxembourg, 21 October 2008. Nucor Corp. of Charlotte, NC, United States (NYSE: “NUE”) has awarded the Paul Wurth Group a contract for engineering and supply of a new generation two-hopper BLT® charging system for the company’s greenfield ironmaking project on a site still to be determined. <more> Paul Wurth Civil Construction Life Cycle EngineeringLuxembourg and Essen, 10 September 2008. Paul Wurth Civil Construction Luxembourg demonstrates its willingness to expand even more into the technical engineering for civil construction projects by founding a department Life Cycle Engineering (LCE) hosted by Paul Wurth Umwelttechnik GmbH in Essen. <more> Change of phone and fax numbers at Paul Wurth S.A.Luxembourg, 04 September 2008. The present telephone extension system of Paul Wurth S.A. (Luxembourg) has been upgraded to 4 digits. As of September 13th, 2008, all current 3 digit extensions at Paul Wurth in Luxembourg will be preceded by the number 2. <more> ArcelorMittal extends use of PCI Technology in ironmakingLuxembourg, 27 August 2008. ArcelorMittal has awarded the Paul Wurth Group with a series of orders for engineering plants for the injection of pulverized coal into blast furnaces. <more> Vallourec & Sumitomo Tubos do Brasil places orders for the construction of its Blast Furnace PlantBelo Horizonte and Luxembourg, 16 July 2008. Vallourec & Sumitomo Tubos do Brasil Ltda (VSB), the seamless pipe joint venture of Vallourec and Sumitomo Metals proceed placing orders of plant and equipment for the Greenfield project at Jeceaba, Minas Gerais, Brazil. <more> Paul Wurth Strengthens Presence in the UkraineLuxembourg, 14 July 2008. With a production of 42.8 million tons of crude steel in 2007, Ukraine is one of the leading steel nations. The iron and steel sector provides around 25% of the industrial output of the country. <more> Bhushan Steel limited, India places order for new Coke Oven Plant in Meramandali, Orissa StateGenoa, 17 June 2008. BHUSHAN Steel, LTD. awarded the contract for the delivery of a new coke making plant at Meramandali – Dhenkanak & Angul District, Orissa, India - to Paul Wurth Italia S.p.A.. <more> Blow-in of new TATA Steel ‘H’ blast furnaceGenova / Luxembourg, 2 June 2008. On 31st May 2008, TATA Steel successfully commissioned its new blast furnace ‘H’ at its Jamshedpur works in Jharkhand. With an inner volume of 3800 cubic meters and a daily production of 7200 tonnes of hot metal, this new blast furnace is the biggest one ever built in India. <more> Paul Wurth: Together with customers at AISTech 2008Luxembourg, 28 May 2008. The Iron & Steel Technology Conference and Exposition took place at Pittsburgh, Pennsylvania on May 5 – 8, 2008. This major international conference gave the opportunity to Paul Wurth to deliver technical papers which had been prepared together with some of its customers. Two papers were related to major projects realized some months ago. <more> New customer in PeruLuxembourg, 23 May 2008. Paul Wurth de Chile Ltda, entity of Paul Wurth Group located in Santiago and taking more specifically care of the application of Paul Wurth and TMT technologies in non-ferrous sectors in Latin America, has been awarded a new contract for the supply of a TMT tapping machine by Doe Run Peru, a Peruvian mining and metallurgical company, for its multi-metal smelting and processing facilities located in the city of La Oroya in Peru (3.720 m.a.s.l). <more> Entry of Mini-BLT® Technology in RussiaLuxembourg, 21 May 2008. The Paul Wurth Group has developed since the mid 90’s a specific charging Bell Less Top® device perfectly fitting the constraints of small size blast furnaces: the Mini-BLT®. This charging system is directly derived from the well known BLT® technology and is specially designed for charging less than 2000 tonnes of burden material per day. More than 140 Mini-BLT® have been put already in operation in China and some others in Western Europe. <more> 2007 – Enlarged technological portfolio and increased profitabilityCet article existe aussi en français - Lesen Sie diesen Beitrag auf Deutsch Luxembourg, 13 May 2008.The ordinary General Meeting of shareholders of Paul Wurth S.A. was held today, May 13, 2008 and approved the financial statements for the year 2007. In 2007, Paul Wurth once again recorded strong growth, confirming the transformation the Group has undergone since several years. All key indicators show an upward trend: sales, staff and results. For the fourth year in a row, the Group contracted a record amount of new orders.<more> Reconducted ISO 9001 certification for Paul Wurth S.A.Luxembourg, 12 May 2008. Paul Wurth S.A. was successfully reconducted in the certification of its Quality Management System according to the ISO 9001 standard further to a complete audit which has been realized from 5 to 9 May 2008 by Bureau Veritas. <more> Lucchini S.p.A. orders basic engineering and hearth reliningGenova, 29 April 2008. In the context of the rebuild of its BF4 in Piombino Works, Italy, Lucchini S.p.A. awarded Paul Wurth Italia S.p.A. on 13th March 2008 an order for basic engineering and the supply of carbon materials for the hearth, including detail and construction engineering, performance tests and site supervision. <more>Paul Wurth Italia to build first coke oven battery in JapanGenova, 29 April 2008. On 14 April 2008, SUMITOMO Metal Industries, Ltd and Paul Wurth Italia S.p.A. officially signed a contract for the delivery of the new coke oven plant N°1E in Kashima Works, Ibaraki, Japan. This will be the first coke oven battery ever supplied by Paul Wurth in Japan. <more>Paul Wurth at Expomin (Santiago de Chile)Luxembourg, 25 April 2008. From 15 till 18 April, the Paul Wurth Group has been present at the 2008 edition of Expomin, the main fair dedicated to mining and metallurgy in South America. More specifically focusing on the non-ferrous industry, this worldwide recognised event gave Paul Wurth the opportunity to present, through its Chilean entity, specific applications of its engineering services and equipment. <more>Yenakievo to install Paul Wurth technologyLuxembourg, 08.04.2008. With a production of 42.8 mtpa of crude steel in 2007, Ukraine is among the ten biggest producers of crude steel in the world. The iron and steelmaking sector provides around 25% of the industrial output of the country. Its dynamic trend (+ 5% in 2007) leads to the redistribution of the assets among local and international steel groups and to the modernization of the production tools. <more>PAUL WURTH: A team-working GroupLuxembourg, 08.04.2008. 1,300 people split in 23 entities throughout the world have to work closely together for coordinating day-to-day actions, preparing and executing projects as well as defining objectives and strategies regarding technical and business development. Such short, medium and long-term challenges require quick and efficient communication. <more>PAUL WURTH: Confirmed Certification of Safety Management SystemLuxembourg, 07.04.2008. Paul Wurth S.A., its subsidiary Geprolux S.A. as well as its affiliated company TMT s.à r.l. (joint company of Dango & Dienenthal GmbH and Paul Wurth S.A.) have been certified for their safety management system according to the VCA-SCC** Safety Checklist Contractors standard (Version 2004) since the year 2005. <more>PAUL WURTH UK LTD – Latest NewsLuxembourg, 27.02.2008. With the great success of our Road Show on Monday February 25th and the subsequent large feedback from candidates, we would like to provide an update on our activities, progress and plans for Paul Wurth UK Ltd. <more> Set-up and development of Paul Wurth UK LtdLuxembourg, 18 February 2008. To meet the increasing demands of our UK and worldwide customers, Paul Wurth has decided to expand its operations with the formation of a new entity, denominated PAUL WURTH UK LIMITED and planned to operate out of North-East England.<more> AMK Alchevsk / Ukraine places order for Blast Furnace No.2 key equipmentLesen Sie diesen Beitrag auf Deutsch Luxembourg, 08 January 2008. A new blast furnace No. 2 becomes the centrepiece of AMK’s hot metal capacity expansion and modernization at their integrated steel plant in Alchevsk.<more> Nonfemet adopts Paul Wurth’s Large Size Cathodes for its new 100 000 tpy zinc cell houseLuxembourg, 07 September 2007. As part of its plan to increase the capacity of its Danxia Lead and Zinc smelter, Nonfemet has decided to use large size cathodes (LSC) of 3,2 m2 and apply full automated devices and equipment for handling and processing the electrodes. The new zinc cell house will have a yearly capacity of 100 000 tonnes zinc. <more> NLMK Lipetsk places orders for the construction of a new Blast FurnaceLesen Sie diesen Beitrag auf Deutsch Luxembourg, 03 August 2007. A new, modern blast furnace, becoming No. 7, will be the centrepiece of NLMK’s hot metal capacity expansion at their Lipetsk plant in Russia. Seized at 13.1 m hearth diameter, it will deliver 3.4m tpy of hot metal to the steelmaking shops. <more> Dofasco will install PCI PlantLesen Sie diesen Beitrag auf Deutsch Luxembourg, 02 August 2007. Dofasco of Canada awarded the Paul Wurth Group with an order for engineering a plant for generation and injection of pulverized coal for the blast furnaces No. 2 and 4 at their Hamilton, ON, works. <more> Vizag Blast Furnace No. 3 contracted to Larsen & Toubro and Paul Wurth2006 – Paul Wurth confirms its leadershipCet article existe aussi en français - Lesen Sie diesen Beitrag auf Deutsch Given the ongoing strong growth of the world steel industry and judicious strategic decisions made in the past which have transformed Paul Wurth into a global solution provider, the year 2006 was marked by important commercial successes for projects of unparalleled size. <more> Hyundai Steel Company places order with Paul Wurth S.A. for the development of the core parts of its new blast furnaces plant in Dangjin, South KoreaHealth and Safety at Paul Wurth: a huge responseCet article existe aussi en français - Lesen Sie diesen Beitrag auf DeutschLuxembourg, 6 March 2007. The second edition of the group-wide “Health & Safety Day”, an initiative of the Arcelor Mittal Group, was a full success at Paul Wurth S.A. in NLMK will install PCI PlantsLesen Sie diesen Beitrag auf DeutschSeverStal North
|